D4000 lathe variable speeds + 3-jaw chuck ø125 mm

D4000 precision lathe with frequency converter and 3-jaw chuck ø 125 mm.

Capabilities:

• Center height: 100 mm
• Between centers: 350 mm
• Spindle bore: 20 mm

Benefits:

• The precision bench lathe is manufactured according to the tool precision standard (DIN8606) and is equipped with a test protocol
• Extremely quiet operation thanks to modern electronically controlled drive technology
• Incl. 5 year warranty, excluding wear parts
• Guaranteed spare parts delivery, even after years
• Produced in Germany

Other characteristics:

• Gray cast iron prismatic bench with diagonal ribs
• Induction hardened and ground guides
• Spindle nose runout accuracy better than 0.005mm
• Cylindrical turning up to 100 mm with an accuracy of 0.01 mm
• Cylindrical turning with a finishing trowel up to 300 mm between centers with an accuracy of 0.015 mm
• The main spindle is fitted with 2 precision adjustable DIN taper roller bearings
• Hand scraped prismatic nut
• Adjustable dovetail guides without play
• Readability of 0.05 mm on the graduated rings of the handles
• Single-phase high-performance series motor, 1.4 kW, variable speed DC version with permanent speed monitoring with overload protection
• Main spindle drive, adjustable via potentiometer over a wide range of cutting speed
• Constant torque over the entire speed range
• Turn a steel rod Ø 50 mm in one step: approximately 5 mm
• Transmission between main spindle and drive
• Chip scrapers prevent dirt and chips from entering the guide
• Lateral adjustment of the upper part of the tailstock +/- 10 mm

Suitable for:

• Metal work
• Simple production and small series
• Perfect for hobbies, modeling, crafts, workshops and industry
• Universally applicable and user friendly

Safeties:

• User-friendly control buttons with separate emergency stop
• Motor protection
• 24V electrical safety components
• Robust chuck protection, equipped with a safety switch

Supplied as standard with:

• 3-jaw chuck Ø 125 with set of drilling and turning jaws
• CM2 live center
• Main passage spindle Ø 20 mm
• Thread with lead screw drive and offset shear
• Reversible core adjustment for left and right threads
• Switch set for metric 0.25 - 7.0 mm and inch 10-40 G/" threads
• 2 automatic longitudinal feeds / spindle drive 0.085 and 0.16 mm/rev
• Control keys
• Englisch manual, inscriptions, CE marking and CE certificate in accordance with the machine directive 2006/42/CE and the CEM directive 2014/30/CE.

Numerous accessories can meet customer requirements